PDA

View Full Version : This 1940 Way Off RPM Possible



Pat
01-01-2008, 06:00 PM
Be sure to look at the photos in order.. Before you comment.. It appears to me it's RPM or what was gonna be an RPM or maybe RPM isn't even the correct terminology.

Shingpumps
01-01-2008, 06:29 PM
The way you have it pictured i'd have to agree. Need more angles.

Pat
01-01-2008, 06:35 PM
Here's some more angles..

Steven
01-02-2008, 01:54 PM
I would have to lean towards die chip or crack on this one..
Steven

Pat
01-02-2008, 02:01 PM
Man that "S" fits into it just so well.. I think I should just send it to Doc Wiles for the heck of it..

Steven
01-02-2008, 02:26 PM
He may know of this one. Before sending it you may want to see if he will take a look at the photo. I think I may even have a few like that around here somewhere. I think I was involved in a discussion about this but it has been quite a while back. Can't remember what the determination of that discussion was.

Steven

Steven
01-02-2008, 03:05 PM
Here are two that I have labeled as (Die Chip on the loop of the 9)
Always good to get some more opinions though.

Steven

Brad
01-02-2008, 08:41 PM
Depth of the punch is the issue here. Why would the top be punched so deep, and the rest be so weak?

Pat
01-02-2008, 08:49 PM
Depth of the punch is the issue here. Why would the top be punched so deep, and the rest be so weak?


Because somebody screwed up punching the MM on the die.. then rubbed it down thinking they got it all..:)

Brad
01-02-2008, 09:00 PM
Because somebody screwed up punching the MM on the die.. then rubbed it down thinking they got it all..:)

That theory makes sense too. You would need a BU early die state example to be sure.

Pat
01-02-2008, 09:24 PM
That theory makes sense too. You would need a BU early die state example to be sure.

Well I'll just go get that out of the closet.. lol.. :)

foundinrolls
04-09-2008, 04:09 PM
Hi,

I know I'm new here:-) I also know that this thread has been here awhile. :-) I am curious as to the outcome on this as it does not look like an RPM to me. It looks like an unusually shaped hit. I've seen scratches that are caused by reeded edges on coins that end up looking like this.

So...do you know how it turned out:-) ?

Thanks,
Bill

DWK
04-09-2008, 05:26 PM
Here are two that I have labeled as (Die Chip on the loop of the 9)
Always good to get some more opinions though.

Steven


Its probably just me, but that second one looks like an insect egg to me.

Check it out with a toothpick.:angel: