Welcome guest, is this your first visit? Click the "Create Account" button now to join.
Page 1 of 2 12 LastLast
Results 1 to 10 of 16
  1. #1
    Registered User CoinFaerie's Avatar
    Join Date
    Jan 2018
    Posts
    35
    Post Thanks / Like
    Rep Power
    8

    2000-P Jefferson Nickel

    Please let me know your thoughts 💭

    I’m questioning this coin that had me at hello “hi I’m weird” — so I pulled it for its color and just eye appeal because it’s well..got me duh what error is this? So I finally found a link and this looks kinda like it.

    I like how how they state in one of the paragraphs “the US mint has not had one yet!”

    I’m a newbie and googled my life and I finally found the closest I think this could be? Let me down gently, lol! I also have a JFK
    1970 Silver Proof coin (I’m chalking that one up to PMD) with lines like such but not this dense ...



    this is where I found my info:


    Part III. Die Installation Errors:
    Use of Canceled and Defaced Dies
    http://www.error-ref.com/?s=Retired+die


    Attached Images Attached Images

  2. #2
    Paid Member jfines69's Avatar
    Join Date
    Jun 2010
    Location
    Florida
    Posts
    28,145
    Post Thanks / Like
    Rep Power
    1770
    That is cool looking... To me it almost looks like PSD but I am not totally sure... If it were PSD that heavy I would think the high spots of the devices such as the hair and the building would be completely ground down... Your pics are a little blurry when I zoomed in... We will see what some of the pros think... You have got me stumped on this one... Good job!!!

    Added... Looking at this again the rims appear some what affected leading me to think PSD from a wire brush!!!
    Last edited by jfines69; 01-24-2018 at 02:09 PM.
    Jim
    (A.K.A. Elmer Fudd) Be verwy verwy quiet... I'm hunting coins!!! Good Hunting!!!

  3. Thanks CoinFaerie thanked for this post
  4. #3
    Paid Member Roller's Avatar
    Join Date
    Feb 2010
    Location
    Miami, FL
    Posts
    6,923
    Post Thanks / Like
    Rep Power
    875
    What does the coin weigh? It does look like post mint damage (PSD).

  5. Likes CoinFaerie liked this post
  6. #4
    Administrator Maineman750's Avatar
    Join Date
    Apr 2011
    Location
    Fayetteville,Pa
    Posts
    11,993
    Post Thanks / Like
    Rep Power
    2819
    We'll move this to the error forum where Mike Diamond might take a look.....my first thoughts were PSD, but it doesn't seem to affect the rims

  7. Thanks VAB2013 thanked for this post
    Likes VAB2013 liked this post
  8. #5
    Forum Ambassador VAB2013's Avatar
    Join Date
    Nov 2013
    Location
    Cullman, AL
    Posts
    12,351
    Post Thanks / Like
    Rep Power
    867
    Thank you Maineman! PM to Mr. Diamond sent!

  9. Thanks Maineman750 thanked for this post
  10. #6
    Registered User stoneman227's Avatar
    Join Date
    Jun 2012
    Location
    C'ville Va.
    Posts
    2,086
    Post Thanks / Like
    Rep Power
    212
    Quote Originally Posted by Maineman750 View Post
    We'll move this to the error forum where Mike Diamond might take a look.....my first thoughts were PSD, but it doesn't seem to affect the rims
    My thoughts as well. Also the C of CENTS on the reverse should have been wiped away werer this PSD.
    Just a guess at this point but the dies could have come together with something other than a planchet in between them and these could be massive die dents.
    Two cancelled dies used together is a bit out there.

    John
    So sad ... My reverse consumption engine was a broken fuel gauge ... gonna look at coins now. John

  11. Likes CoinFaerie liked this post
  12. #7
    Paid Member, Error Expert
    Join Date
    Jan 2008
    Posts
    1,102
    Post Thanks / Like
    Rep Power
    764
    It sure looks scratched up to me. But that's what I first thought about my one and only example of a coin struck by defaced dies. Feel free to send it to me for an examination. -- Mike

  13. Thanks VAB2013, Maineman750 thanked for this post
    Likes VAB2013, CoinFaerie liked this post
  14. #8
    Forum Ambassador VAB2013's Avatar
    Join Date
    Nov 2013
    Location
    Cullman, AL
    Posts
    12,351
    Post Thanks / Like
    Rep Power
    867
    Quote Originally Posted by mikediamond View Post
    It sure looks scratched up to me. But that's what I first thought about my one and only example of a coin struck by defaced dies. Feel free to send it to me for an examination. -- Mike
    Thank you very much Mike!

    Coin Faerie, you can private message Mike.

    Go to "Notifications" then "In Box", then "Send New Message" in the "Recipient Users" type in mikediamond and that will pop up, click on that and continue with your private message so you can get the address to send it to him if you would like to do that.
    Last edited by VAB2013; 01-24-2018 at 08:29 PM.

  15. #9
    Registered User CoinFaerie's Avatar
    Join Date
    Jan 2018
    Posts
    35
    Post Thanks / Like
    Rep Power
    8
    A good stump is always a good long thought, I’m glad im not the only one feeling...but she is a pretty coin to be stumped on - JFines
    It weighs 4.929 grams - thanks for asking - Roller

    That’s a really good and I wouldn’t have guessed that process - it’s really great hearing another possibility of how this coin came to be. Thank you I’ve learned something new — Stoneman

    VAB - I appreciate you moving and letting me know how to contact mike d.

    Many thanks to everyone - I’m awaiting my new scope to take better pics. Should be here Friday yay! Sorry if I haven’t learned how to reply just yet to everyone’s comments. It’s greatly appreciated - MAHALO
    Last edited by CoinFaerie; 01-24-2018 at 09:04 PM.

  16. Thanks VAB2013 thanked for this post
    Likes VAB2013 liked this post
  17. #10
    Forum Ambassador VAB2013's Avatar
    Join Date
    Nov 2013
    Location
    Cullman, AL
    Posts
    12,351
    Post Thanks / Like
    Rep Power
    867
    You are welcome! Please check to see if your Private Messaging is turned on. I just sent you a Private Message.

    Go to "Settings" top right corner
    scroll down to "General Settings" on the left
    scroll down to "Private Messaging" and click the bullet next to "Private Messaging On"

    Thank you!

 

 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •