-
Unanswered: 2017 P Copper Plating Failure
So in my Coin Roll Hunting I found a 2017 P with post mint damage. This damage I call copper plating failure. The copper plating can be seen without magnification. It looks like dried scales on the obverse. The reverse is unremarkable. Any ideas on how this PMD occurred?
2017P_obv_plating_failure.png
-
Post Thanks / Like - 1 Thanks, 1 Likes
-
I'm not sure if it's the plating. I'm thinking a chemical agent has dried on it and left that design. Looks like a soak in acetone is in order.
-
Post Thanks / Like - 0 Thanks, 1 Likes
-
Just plain acetone from Home Depot?
-
Originally Posted by
emodx
Just plain acetone from Home Depot?
Yes, that will do the trick.
-
If the lines are still there after the acetone soak it might be cracking to the copper plating caused by extreme cold being applied.
I don't know if dry ice would do it quick enough or a drop of liquid nitrogen? The two different metals (copper and zinc) would expand and contract differently in extreme conditions.
-
Post Thanks / Like - 0 Thanks, 1 Likes
-
In any case, acetone or whatever might get it off, that'll show that it's something on the surface. If it stays then something messed up the plating but in either case it's post strike damage.
-
Post Thanks / Like - 0 Thanks, 1 Likes
-
Reminds me of "Franks Fractal" art work.
-
Looks to me like some one scraped a bunch of gunk off the coin that or stained... Franks fractals were cool!!!
Jim
(A.K.A. Elmer Fudd) Be verwy verwy quiet... I'm hunting coins!!! Good Hunting!!!
Bookmarks