I am really miffed about this. Under the scope I can see no fg. On the whole reverse shot the fg is visible. On the close up of the area I do not see the fg (maybe I don't want to). I doubt that it is detectable under a 4X that I understand the grading companies go by. So, is this a no fg? This is an MS 65 coin in my op. so the difference is meaningful.
The grading company will not use a high magnification so I would say no.....but at the same time ,we are trying to guess what they will do. I will say that I have an S-VDB that you couldn't see the VDB with plain eyes or a 10x loupe.....but I took a full coin shot of the reverse and it popped right out.....great surprise for me
George,
Trying to compare dies. Is that a die crack (spiked head type) on the obverse starting next to the W? Unfortunately, the CPG I have only shows the part of the reverse where the FG is supposed to be. I think the die I have is different than yours, but mine is brown and circulated.
All opinions expressed are not necessarily shared by willbrooks or his affiliates. Taking them may result in serious side effects. Results may vary. Offer not valid in New Jersey.
The grading company will not use a high magnification so I would say no.....but at the same time ,we are trying to guess what they will do. I will say that I have an S-VDB that you couldn't see the VDB with plain eyes or a 10x loupe.....but I took a full coin shot of the reverse and it popped right out.....great surprise for me
I'm reminded of what I learned in my past (and no I don't mean as a car thief LOL) that even though the vin number may be round off the engine of a vehicle, with certain application you can bring it back to be legible. I believe that polishing the device entirely off (to the naked eye) there will always be a different texture in the metal where the device once was and by some means or lighting, etc. the "ghost" will always be there and the device will appear.
George....what I forgot to mention is that ANACS was able to discern the VDB as well......when I sent it in I was afraid I might have to tell them my method of seeing it.
George,
Trying to compare dies. Is that a die crack (spiked head type) on the obverse starting next to the W? Unfortunately, the CPG I have only shows the part of the reverse where the FG is supposed to be. I think the die I have is different than yours, but mine is brown and circulated.
Yes, there is a crack staring near the top of the W and west of it running into the hair.
It's close, but it would not make the cut at PCGS or NGC. If you look at PCGS examples, you'll see this area completely smooth and devoid of any remnants. I've attached an image showing markers for the main die that PCGS will attribute. ANACS I wouldn't even bother with because there isn't a market for this variety in an ANACS holder.
“What can be asserted without evidence can also be dismissed without evidence.”
I think the difference in your images may be a product of the lighting.
The whole coin shot appears to be coming from about 5:00 and creating more shadows. While the closeup is more overhead eliminating the shadows?
Bookmarks