PDA

View Full Version : 1987 rpm



cbm_0505
10-22-2013, 11:28 AM
Can anyone tell what RPM this may be? I looked for markers but was unsuccessful.


Thank Chris

coppercoins
10-22-2013, 11:32 AM
Cannot tell on this one because of lighting.

liveandievarieties
10-22-2013, 11:34 AM
On the outside of the mintmark, to the southeast, that is called split plating. It occurs when the copper plating is split and exposes the zinc core. Not an RPM.

As a side note- it won't help to locate markers until you can match the die variety. Markers are purely confirmation diagnostics, not to be used for attributing, but to confirm once you've matched the die variety.

cbm_0505
10-22-2013, 11:40 AM
Thanks guys. Hope this one is a better photo. Its is really hard to find the markers on the 80's RPM's

Thank again
Chris

cbm_0505
10-22-2013, 11:41 AM
I agree thank you for the help...

Magers
10-22-2013, 11:41 AM
1MM-006 Looks close... but a better pic would be nice.

liveandievarieties
10-22-2013, 11:53 AM
Good eye Chris!

eaxtellcoin
10-22-2013, 06:37 PM
Can you give us a clear date and mintmark photo? I Don't think from the first photo it's RPM#6 two far to the east of the date.

Maineman750
10-22-2013, 06:53 PM
Agree with Eric..too far east for 006

cbm_0505
10-22-2013, 07:09 PM
Okay, thanks guys and I do my best for better photos...

Thanks everyone.
Chris