2009P Extra Finger

[Barry T]

http://www.lincolncentforum.com/forum/attachment.php?attachmentid=124446&stc=1http://www.lincolncentforum.com/forum/attachment.php?attachmentid=124447&stc=1http://www.lincolncentforum.com/forum/attachment.php?attachmentid=124448&stc=1http://www.lincolncentforum.com/forum/attachment.php?attachmentid=124449&stc=1http://www.lincolncentforum.com/forum/attachment.php?attachmentid=124450&stc=1
Finally I found something to post. This was one of only 12 2009's that I had. I couldn't find the markers but think it is WDDR-014.

[VAB2013]

Nice find Barry, Congrats! I'm thinking it may be coppercoins.com Die 30, take a look at this link https://coppercoins.com/lincoln/diestate.php?date=2009&die_id=2009p1dr030&die_state=mds

the reason is, I am not seeing anything above the thumb on your coin. See if you have the die gouge marker between the lower N and T of CENT

or maybe Die 98 (hope it's Die 30 because the light die scratches die markers on Die 98 might be hard to see on a real shiny coin)

[TJ1952]

Looks like a nice find Barry!Look closely for the other markers. Welcome to the LCF!

http://doubleddie.com/60701.html


I edited your posting... You should not post the listings like you did do to copy write issues unless you have express written permission... I included the link to Wexlers 2009P listings for this rev!!!
Jim

[VAB2013]

Tom, it could be coppercoins.com Die 12 but the thing on the top doesn't look quite right to me. (Just saw the thing on the top of the thumb in a couple of Barry's other pics)

[Barry T]

http://www.lincolncentforum.com/forum/attachment.php?attachmentid=124451&stc=1http://www.lincolncentforum.com/forum/attachment.php?attachmentid=124452&stc=1http://www.lincolncentforum.com/forum/attachment.php?attachmentid=124453&stc=1http://www.lincolncentforum.com/forum/attachment.php?attachmentid=124454&stc=1http://www.lincolncentforum.com/forum/attachment.php?attachmentid=124455&stc=1

[VAB2013]

Thank you for the updated pics Barry. Well, I'm not seeing the die marker for CC Die 30. Are you seeing anything that matches coppercoins.com Die 12 or 98?

[TJ1952]

Tom, it could be coppercoins.com Die 12 but the thing on the top doesn't look quite right to me. (Just saw the thing on the top of the thumb in a couple of Barry's other pics)

I'm not sure either Viv. I'm afraid I can't add much value here.

[VAB2013]

I'm not sure either Viv. I'm afraid I can't add much value here.

Thank you Tom! We need Barry to compare his coin to the listings because of the shine and glare from this photos, it's difficult for us to see. Barry, let us know what you are finding okay!

[jfines69]

CCs 012 is an EDS http://www.coppercoins.com/lincoln/diestate.php?date=2009&die_id=2009p1dr012&die_state=eds There is a chip on Abes left shoulder... Is that on your coin??? Remember that die abrasions can and do wear away over the dies life... Chips and cracks will get larger... If you do not have the chip or the other portion of the DDR on the north side of the thumb then yours is most likely a different die... If you want I will down load your images and look thru the listings... Hopefully we can help you out!!!

[Barry T]

There is a spot on his lapel and on left shoulder and possibly scratches between N & T but they aren't quite the same as the picts in CC. My camera won't take a closer photo.

[jfines69]

Hard to tell if they die dots and chip match up... Your coin is really shiney and that makes it difficult at best to get clear images and trying to see whats there... If possible try and get pics with out so much reflection... The close ups are fine other than the lite reflection... Die chips and cracks will be in the same location through out the dies life and will be different in size and shape depending on the die stage... Die scratches/abrasions either wear or get abraded away over time!!!

[Barry T]

Ok, thanks Jim. I'm still trying to perfect my photography skills. It's hard to get the light just right. I'll try to get a better shot of the markers. Advise from anyone would be appreciated.

[jfines69]

I use a black back ground... I also reflect the light off white printer paper back onto the coin... Not sure if that will help any but that is what works for me the best!!!