Copper plated 1943 steel cent possible?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • amnight
    Member
    • Jul 2012
    • 295

    #1

    Copper plated 1943 steel cent possible?

    I found this coin the front looks to have copper on it but the back looks steel. What I wanted to know is if it is possible this was a copper coated steel cent or did someone try to coat it post mint. It is attracted to a magnet as well. Thanks.
    Attached Files
    -Steve
  • willbrooks
    Die & Design Expert, LCF Glossary Author

    • Jan 2012
    • 9477

    #2
    The obverse and reverse look exactly the same. It is a normal steel cent with corrosion and PMD.
    All opinions expressed are not necessarily shared by willbrooks or his affiliates. Taking them may result in serious side effects. Results may vary. Offer not valid in New Jersey.

    Comment

    • jallengomez
      Member
      • Jan 2010
      • 4447

      #3
      Copper plated steel cents are very common. Over the years, they've been plated and sold as novelty items, so it's uncommon at all to find them. If ever in doubt, weigh it.
      “What can be asserted without evidence can also be dismissed without evidence.”

      Comment

      • amnight
        Member
        • Jul 2012
        • 295

        #4
        I tried taking more close up pictures. I don't know if they will help as it might need to be seen in hand to see the copper. But, on the obverse you can see where it looks like the copper wore off and shows the steel underneath. I also took a picture of both the copper plated and normal steel cent together, maybe that will help. Thanks.
        Attached Files
        -Steve

        Comment

        • amnight
          Member
          • Jul 2012
          • 295

          #5
          Originally posted by jallengomez
          Copper plated steel cents are very common. Over the years, they've been plated and sold as novelty items, so it's uncommon at all to find them. If ever in doubt, weigh it.
          What should it weigh if it is plated? 3.11grams?
          -Steve

          Comment

          • jallengomez
            Member
            • Jan 2010
            • 4447

            #6
            If it's plated, it should be closer to the weight of a steel cent which is 2.7 grams.
            “What can be asserted without evidence can also be dismissed without evidence.”

            Comment

            • amnight
              Member
              • Jul 2012
              • 295

              #7
              It does weigh about 2.7 grams. So it is a novelty item, correct?
              -Steve

              Comment

              • jallengomez
                Member
                • Jan 2010
                • 4447

                #8
                Yes. That means it was a steel cent that someone plated. There are examples of 1943 cents struck on copper planchets, but those would obviously weigh in at 3.11 grams.
                “What can be asserted without evidence can also be dismissed without evidence.”

                Comment

                • pennies4pennies
                  Member
                  • Dec 2008
                  • 3293

                  #9
                  If you ever see a 1943 that looks like copper, put a magnet to it. If it sticks it's steel.
                  I have two copper coated ones and they look really as can be but a magnet proves other wise.
                  Last edited by pennies4pennies; 02-23-2013, 10:40 PM.
                  Those are my principles. If you don't like them I have others
                  http://stores.ebay.com/pennies4pennies

                  Comment

                  • GrumpyEd
                    Member
                    • Jan 2013
                    • 7229

                    #10
                    If you ever see a 1943 that looks like copper, put a magnet to it. If it sticks it's steel.
                    It's the easy first step.
                    If at home see if it sticks to the door seal on your refrigerator. I seem to lose all magnets

                    I find copper plated ones in wheat bags, many must have been plated and find their way into groups of wheats.

                    Comment

                    • Maineman750
                      Administrator

                      • Apr 2011
                      • 12079

                      #11
                      This is probably just a home experiment.I did one last year by looking it up on the internet and forgot the exact process,but I know salt and vinegar were involved...pretty easy to do,but messy.
                      https://www.ebay.com/sch/maineman750...75.m3561.l2562

                      Comment

                      • jcuve
                        Moderator, Die & Variety Expert
                        • Apr 2008
                        • 15458

                        #12
                        If that's rust (i.e. iron oxide) at the E of ONE, that would tell you that it's a corroded steely. Copper doesn't oxidize in that manner, or turn that color.



                        Jason Cuvelier


                        MadDieClashes.com - ErrorVariety.com
                        TrailDies.com - Error-ref.com - Port.Cuvelier.org
                        CONECA

                        (images © Jason Cuvelier 2008-18)___________________

                        Comment

                        Working...