Error Lamination | 64P with small LAM and maybe a struck through?

[makecents]

Check this out and see what you think. I'm not sure if the area at E PL is PSD or a struck through. It looks like there is some PSD too though.

Thanks for any input, Jon.

[Petespockets55]

Like that one Jon. Does look like a Lam.
Do I see something around the S & T also?

[VAB2013]

Very interesting Jon! I see the lam at ES of States but the other area at EPU is puzzling. It looks like there are two areas top and bottom of that spot that are raised significantly. Am I seeing that right?

[makecents]

Like that one Jon. Does look like a Lam.
Do I see something around the S & T also?

Thanks Cliff!! I'll take a look at it this evening in that area. There seems to be a lot going on with this coins reverse but am having a hard time picking out PSD from other things because I think there are both going on.

[makecents]

Very interesting Jon! I see the lam at ES of States but the other area at EPU is puzzling. It looks like there are two areas top and bottom of that spot that are raised significantly. Am I seeing that right?

Thanks Viv!! I think you are seeing it correctly and I will will try to get some better pics from angles this evening to maybe show it better.

[jfines69]

Nice lam... Looks like it took a hit that kick it up a little bit and displaced some of the metal... Just west of the 1st U in UNUM are what appears to be 3 gouges caused by what ever hit it!!!

[makecents]

Nice lam... Looks like it took a hit that kick it up a little bit and displaced some of the metal... Just west of the 1st U in UNUM are what appears to be 3 gouges caused by what ever hit it!!!

Thanks Jim. I thought the majority of it was from a hit or multiple hits but it look peculiar. I'll try to go ahead and get some angled pics to show it better.

[makecents]

Like that one Jon. Does look like a Lam.
Do I see something around the S & T also?

Cliff, I think it's just die cracks and a tiny break.

[makecents]

Very interesting Jon! I see the lam at ES of States but the other area at EPU is puzzling. It looks like there are two areas top and bottom of that spot that are raised significantly. Am I seeing that right?

Viv, I think most of what we are seeing is actually incuse. It does not look like much is above the coins field but below it.

[VAB2013]

Viv, I think most of what we are seeing is actually incuse. It does not look like much is above the coins field but below it.

Wow Jon, those are really good follow up photos! I'm not sure but it looks pretty deep to be a lam, kinda leaning more toward PSD. The other photo above at ST also looks more like PSD to me. But, I just woke up thinking I was late to work LOL... so don't take what I say to the bank. Long week, glad tomorrow is Friday

Edit: I just looked back and Jim thinks it's a lam so there ya go... it's a lam with some damage around it!

[makecents]

I didn't do a very good job explaining when I first posted this Viv. I thought the area at E PL may have been a struck through but was leaning towards PSD, just thought it looked really odd. There is a Lam in my first pics that runs down from the rim in between "ES" of STATES (3rd pic down) and then Cliff had asked about the area around "ST" of states but it was just a small die crack. The whole upper half of the reverse had PSD though. You can see chunks of letters floating in almost every pic. WOOOOOHOOOO!! FRIDAY!!!!

[jfines69]

Nice angle pics Jon... I didn't realize that it was so deep... Looks like most of the metal in that one area at the EP was knocked out!!!

[VAB2013]

Okay, now I think I get it Jon. The lam is at ES, the die crack is at ST and EPU has some deep PSD. Is that correct?

[jfines69]

Okay, now I think I get it Jon. The lam is at ES, the die crack is at ST and EPU has some deep PSD. Is that correct?

Almost there... The area at EPU is part of the lam but the metal is missing due to the hit just west of the 1st U in UNUM!!!

[VAB2013]

Almost there... The area at EPU is part of the lam but the metal is missing due to the hit just west of the 1st U in UNUM!!!

Okay thank you Jim! I couldn't tell if that was a lam at EPU, cool that you and Jon figured this one out, it was complicated! Congrats Jon!