Error CUD | 1991P- Unlisted Rim cud with a little grease on the die

[11997755]

This one looks kind of neat. Sending to JC to see if I can get it listed.


1991P_RimCud_Obverse.jpg1991P_RimCud.jpg1991P_RimCud_Close.jpg1991P_RimCud_Greaser_Marker.jpg1991P_RimCud_Reverse.jpg

[VAB2013]

Nice rim cud, Congrats! Cool you can still tell it's a 1991, that last 1 is just barely showing up! Let us know if JC lists it!

[makecents]

That is a very cool find!! There's a lot going on there, MAD, CUD and greaser!

[11997755]

Let us know if JC lists it!

JC listed it as CU-1c-1991-04 Rim Cud

http://cuds-on-coins.com/lincoln-cent-cuds-1909-present/

[makecents]

JC listed it as CU-1c-1991-04 Rim Cud

http://cuds-on-coins.com/lincoln-cent-cuds-1909-present/

Very cool, congrats on the new listing Earl!!

[VAB2013]

Congrats on the rim cud listing! Cool looking greaser too! Thanks for letting us know!

[makecents]

Earl, when I saw your name on this listing, I thought, wow, I recognize that name for some reason. I saw your responce on a Spike Head post I had and it clicked. You are the Spike Head king!!! Nice!!

[Petespockets55]

Congrats Earl. Nicely done.

[jfines69]

That is cool looking... Could this be something other than a rim cud??? The possible cud does not look large enough to cause everything I see??? When I zoomed in It looks like the rim is still there but slid up and SE... The 1 is gone most likely due to metal flow toward the rim... The L of LIBERTY also looks gone but not from a grease filled die??? Also the dies are misaligned... On the rev if you look at the plating and devices in the area of the memorial toward RICA and the rim everything slid in the same direction and appears distorted to me... The coin also looks slightly out of round??? It could just be me over anal eyesing again... What does the edge look like??? Maybe a broken collar??? Maybe a good coin for Mike Diamond to come look at???

[VAB2013]

Thank you Jim for bringing up these questions! Earl, please PM mikediamond and ask him to take a look for you. You can put a link to this thread in the PM.

[jfines69]

Thank you Jim for bringing up these questions! Earl, please PM mikediamond and ask him to take a look for you. You can put a link to this thread in the PM.

I do hope Mike chimes in... It is nice that we have pros like him here to help us out!!!

[11997755]

I PM'd him a couple days ago and he said it was a rim cud with some grease on the die.

[jfines69]

I PM'd him a couple days ago and he said it was a rim cud with some grease on the die.

Cool... Thanks for the follow up... Congrats on the new listing!!!

[11997755]

Thank you everyone for your input on this one.