1950 S RPM?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • dinkyblue
    Member
    • May 2015
    • 1285

    #1

    1950 S RPM?

    Looks like an RPM, not sure which one. I was able to match a die gouge dot over the S in STATES on the reverse with IMM-001 however, nothing else seems to match. Position of the mint mark does not seem to match either. No die cracks. Hoping someone might have a idea on this one. Thanks................................... dinkyblue
    Attached Files
    Last edited by dinkyblue; 01-11-2017, 11:26 AM. Reason: new images
  • jallengomez
    Member
    • Jan 2010
    • 4447

    #2
    Definitely an RPM and definitely not 001. Looks closest to 1mm-017.
    “What can be asserted without evidence can also be dismissed without evidence.”

    Comment

    • jfines69
      Member
      • Jun 2010
      • 28848

      #3
      Nice find... Looks close to CCs 018 http://coppercoins.com/lincoln/diest...&die_state=mds Not sure on the position of the MM... Yours may be rotated farther CCW than CCs but that may be die wear on yours as it appears to be a LDS and CCs is MDS... Some of the abrasions around your MM and CCs sample are close... Also on the rev there are some die scratches running thru the E of STATES that appear to match up... Yours also appears to have some die scratches running N - S thru AMERICA and STATES on the east end that are really close in their position!!!
      Jim
      (A.K.A. Elmer Fudd) Be verwy verwy quiet... I'm hunting coins!!! Good Hunting!!!

      Comment

      • dinkyblue
        Member
        • May 2015
        • 1285

        #4
        I looked at IMM-017 and the MM position did not appear to match, IMM-018 is closer as far as the date and MM position. Also the scratches on the reverse are close as Jay pointed out. But still not conclusive. I put IMM-001 up only because the die dot in last S in STATES matched mine, but the MM position for IMM-001 does not match. More info would help. It is an RPM but which one?.........................Thanks for your input................Dan

        Comment

        • jfines69
          Member
          • Jun 2010
          • 28848

          #5
          Can you get some closeups of the areas that CC shows on BERTY the area north of the 19 and the areas around USA... Try to frame the pics the same way if possible!!!
          Jim
          (A.K.A. Elmer Fudd) Be verwy verwy quiet... I'm hunting coins!!! Good Hunting!!!

          Comment

          • dinkyblue
            Member
            • May 2015
            • 1285

            #6
            Yes, loading new images.........................Dan
            Attached Files
            Last edited by dinkyblue; 01-11-2017, 11:34 AM.

            Comment

            • jfines69
              Member
              • Jun 2010
              • 28848

              #7
              I see 2 possible markers on yours that are really faint compared to CCs 018 http://coppercoins.com/lincoln/diest...&die_state=mds Off the NW corner of the 1 in your date is a die scratch/abrasion running nearly due north and it is also there on CCs sample... Also on the rev due east of the A in RICA is a series of scratches/abrasions running SSE - NNW the one that runs up just west of the SW corner of the E in STATES appears to be on yours... The one on CCs sample is just west of the scratch/abrasion the arrow is pointing to - to the south of the E... Check it out and let me know!!!
              Jim
              (A.K.A. Elmer Fudd) Be verwy verwy quiet... I'm hunting coins!!! Good Hunting!!!

              Comment

              • dinkyblue
                Member
                • May 2015
                • 1285

                #8
                There are some features on IMM-014, have a look at the line on the rim just off of LIBERTY. die misalignment? then compare to mine. also look at the C and A in AMERICA on the reverse. The die scratches are close, and so is the MM position on the date. Not really sure about this. Please let me know what you think. Thanks....................Dan

                Comment

                • jfines69
                  Member
                  • Jun 2010
                  • 28848

                  #9
                  I believe your MM is to far south and west to be CCs 014 http://coppercoins.com/lincoln/diest...&die_state=mds Also the split in the lower serif of yours is farther toward the bottom of the MM... The die scratches on the rev are close but are in a slightly different position!!!
                  Jim
                  (A.K.A. Elmer Fudd) Be verwy verwy quiet... I'm hunting coins!!! Good Hunting!!!

                  Comment

                  • dinkyblue
                    Member
                    • May 2015
                    • 1285

                    #10
                    After checking all the listings one might say that IMM-018 is the closest match as far as I can tell. I think this one might be an earlier die state as it does not show a lot of die scratches on the obverse. However the reverse does show some pronounced die scratches. Hard to say...........................Dan

                    Comment

                    • stoneman227
                      Member
                      • Jun 2012
                      • 2086

                      #11
                      Nice rpm , Congrats !

                      John
                      So sad ... My reverse consumption engine was a broken fuel gauge ... gonna look at coins now. John

                      Comment

                      • jfines69
                        Member
                        • Jun 2010
                        • 28848

                        #12
                        Originally posted by dinkyblue
                        After checking all the listings one might say that IMM-018 is the closest match as far as I can tell. I think this one might be an earlier die state as it does not show a lot of die scratches on the obverse. However the reverse does show some pronounced die scratches. Hard to say...........................Dan
                        Sounds good to me... These can be difficult at times to attribute... The dies can change a lot over their life... Previous markers can be worn or abraded off and new ones put in place!!!
                        Jim
                        (A.K.A. Elmer Fudd) Be verwy verwy quiet... I'm hunting coins!!! Good Hunting!!!

                        Comment

                        • dinkyblue
                          Member
                          • May 2015
                          • 1285

                          #13
                          I know you went to a lot of effort to help me attribute this coin, and I do thank you, or one might say jolly good show ol'chap .........................Dan

                          Comment

                          • jfines69
                            Member
                            • Jun 2010
                            • 28848

                            #14
                            Originally posted by dinkyblue
                            I know you went to a lot of effort to help me attribute this coin, and I do thank you, or one might say jolly good show ol'chap .........................Dan
                            Always glad to help Dan!!!
                            Jim
                            (A.K.A. Elmer Fudd) Be verwy verwy quiet... I'm hunting coins!!! Good Hunting!!!

                            Comment

                            Working...