Buffing out scratched slabs?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • duece2seven
    Member
    • Feb 2013
    • 1567

    #1

    Buffing out scratched slabs?

    I was curious if anyone here has attempted to buff out a scratched slab before? Looking for products and how the process works. Thanks. Tracy
  • willbrooks
    Die & Design Expert, LCF Glossary Author

    • Jan 2012
    • 9477

    #2
    Originally posted by duece2seven
    I was curious if anyone here has attempted to buff out a scratched slab before? Looking for products and how the process works. Thanks. Tracy
    Great question. What was that magic stuff they used to sell on tv that made scratched-up surfaces crystal clear again? I don't know the name, because I always tuned out because I can't stand it when the salesmen yell at me the entire time.
    All opinions expressed are not necessarily shared by willbrooks or his affiliates. Taking them may result in serious side effects. Results may vary. Offer not valid in New Jersey.

    Comment

    • Maineman750
      Administrator

      • Apr 2011
      • 12079

      #3
      Depends on how deep the scratches are, but there are products out there that work on plastic face shields for mc helmets ( I think it was Meguires)...I have also polished the plastic headlights on my car by using progressively finer sandpaper and finally a buffing compound.
      https://www.ebay.com/sch/maineman750...75.m3561.l2562

      Comment

      • rlm's cents
        Member
        • Aug 2011
        • 453

        #4
        Go to your auto department and get a clear plastic cleaner (aka head light polisher). They work well provided the scratches are not deep. I use it with a Dremel at med/low speed with a felt (definitely low speed) or a muslin wheel.
        http://boards.collectors-society.com.../40238/sig.jpg

        Comment

        • mrmike916
          Member
          • Apr 2012
          • 1381

          #5
          Thanks for bringing this one up Tracy! I too had the same question, and have used headlight resort kits, but only on headlights. Time to find a cheap slab and practice!

          Comment

          • Maineman750
            Administrator

            • Apr 2011
            • 12079

            #6
            One other thing you can try....Deep Woods Off, spray some on a soft rag and rub the plastic, then buff with a soft cloth. It works really well on headlights. I will say you can use too much so use sparingly until you get it right, or practice on something that isn't important.
            https://www.ebay.com/sch/maineman750...75.m3561.l2562

            Comment

            • jfines69
              Member
              • Jun 2010
              • 28848

              #7
              Depending on the type of plastic acetone should remove most scrathes!!!
              Jim
              (A.K.A. Elmer Fudd) Be verwy verwy quiet... I'm hunting coins!!! Good Hunting!!!

              Comment

              • Maineman750
                Administrator

                • Apr 2011
                • 12079

                #8
                Originally posted by jfines69
                Depending on the type of plastic acetone should remove most scrathes!!!
                Soaking it, or just a quick dunk ? You might want to get a little more detailed Jim...never know who might read this and try something silly
                https://www.ebay.com/sch/maineman750...75.m3561.l2562

                Comment

                • jfines69
                  Member
                  • Jun 2010
                  • 28848

                  #9
                  Originally posted by Maineman750
                  Soaking it, or just a quick dunk ? You might want to get a little more detailed Jim...never know who might read this and try something silly
                  DUHHHHHHHHHHHHHH... Wipe it with a soft cloth moistened with acetone... Don't want any getting inside!!!
                  Jim
                  (A.K.A. Elmer Fudd) Be verwy verwy quiet... I'm hunting coins!!! Good Hunting!!!

                  Comment

                  • duece2seven
                    Member
                    • Feb 2013
                    • 1567

                    #10
                    Originally posted by jfines69
                    DUHHHHHHHHHHHHHH... Wipe it with a soft cloth moistened with acetone... Don't want any getting inside!!!

                    You mean I wasn't supposed to soak it overnight! !!

                    Comment

                    • Scott
                      Paid Member

                      • Mar 2014
                      • 262

                      #11
                      I allways thought slabs were airtight?

                      Comment

                      • willbrooks
                        Die & Design Expert, LCF Glossary Author

                        • Jan 2012
                        • 9477

                        #12
                        Originally posted by duece2seven
                        You mean I wasn't supposed to soak it overnight! !!
                        I put the slab in the only "pocket" I had left and filled my sensory deprivation chamber with acetone. I'll let you know (or I won't) how it works out.
                        All opinions expressed are not necessarily shared by willbrooks or his affiliates. Taking them may result in serious side effects. Results may vary. Offer not valid in New Jersey.

                        Comment

                        • duece2seven
                          Member
                          • Feb 2013
                          • 1567

                          #13
                          Originally posted by willbrooks
                          I put the slab in the only "pocket" I had left and filled my sensory deprivation chamber with acetone. I'll let you know (or I won't) how it works out.
                          That's it! No more 'Nog for you, sir! Good luck with your experiment nonetheless!

                          Comment

                          • duece2seven
                            Member
                            • Feb 2013
                            • 1567

                            #14
                            Thanks for all your responses, guys. I meant to ask earlier if this is an accepted practice.
                            Is it "cleaning" or is it "conservation"? Sorry, I couldn't help myself!

                            Comment

                            • Maineman750
                              Administrator

                              • Apr 2011
                              • 12079

                              #15
                              Originally posted by duece2seven
                              Is it "cleaning" or is it "conservation"?
                              Absolutely !
                              https://www.ebay.com/sch/maineman750...75.m3561.l2562

                              Comment

                              Working...