1941P Improper Alloy Mix (Woody) with LAM question

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • VAB2013
    Forum Ambassador
    • Nov 2013
    • 12351

    #16
    Originally posted by jfines69
    Also could you get a close up of the shoulder along the back side of the jacket???
    LOL Jim, I just caught your joke Yeah, this light thing is bugging me but I'm still working on making it better!

    Here are a few close ups, also a similar looking thing at Liberty but it doesn't extend to the bust or to either rim.
    Attached Files

    Comment

    • jfines69
      Member
      • Jun 2010
      • 28848

      #17
      Originally posted by VAB2013
      LOL Jim, I just caught your joke Yeah, this light thing is bugging me but I'm still working on making it better!

      Here are a few close ups, also a similar looking thing at Liberty but it doesn't extend to the bust or to either rim.
      I tried the light thing but it didn't work I downloaded 2 of your first sets of images... The full obverse and the close up of EP... I will point out a few things later for you!!!
      Jim
      (A.K.A. Elmer Fudd) Be verwy verwy quiet... I'm hunting coins!!! Good Hunting!!!

      Comment

      • jfines69
        Member
        • Jun 2010
        • 28848

        #18
        Vivien,
        I did some pointers around the P to show the hit, displaced metal from the hit and the area of the lam that is still in placed but beginning to peel... I also cropped your full obv image but was unable to get a clear pic of the close up... I put a pointer to where it looks like a lam peel starting up which I guess is not really the shoulder but the back of Abes arm... If you could get a clear close up of that area it may help me figure it out!!!
        Attached Files
        Jim
        (A.K.A. Elmer Fudd) Be verwy verwy quiet... I'm hunting coins!!! Good Hunting!!!

        Comment

        • VAB2013
          Forum Ambassador
          • Nov 2013
          • 12351

          #19
          Originally posted by jfines69
          Vivien,
          I did some pointers around the P to show the hit, displaced metal from the hit and the area of the lam that is still in placed but beginning to peel... I also cropped your full obv image but was unable to get a clear pic of the close up... I put a pointer to where it looks like a lam peel starting up which I guess is not really the shoulder but the back of Abes arm... If you could get a clear close up of that area it may help me figure it out!!!
          Wonderful photos and explanation Jim! Now I get it, thank you! Let me see if I can get a closer shot of the back of Abe's arm.

          Comment

          • VAB2013
            Forum Ambassador
            • Nov 2013
            • 12351

            #20
            Jim, here's a pic of the back of Abe's arm. Thank you for taking a closer look, but I think it's just PSD.
            Attached Files

            Comment

            • jfines69
              Member
              • Jun 2010
              • 28848

              #21
              Originally posted by VAB2013
              Jim, here's a pic of the back of Abe's arm. Thank you for taking a closer look, but I think it's just PSD.
              Thanks for the follow up image Vivien... Looks like PSD to me also!!!
              Jim
              (A.K.A. Elmer Fudd) Be verwy verwy quiet... I'm hunting coins!!! Good Hunting!!!

              Comment

              • VAB2013
                Forum Ambassador
                • Nov 2013
                • 12351

                #22
                Originally posted by jfines69
                Thanks for the follow up image Vivien... Looks like PSD to me also!!!
                Thank you Jim for all of your help! BIG SNOW update! Right now it is snowing like crazy all around us to the West, North and South but hasn't made it here yet, just flurries** From the looks of things, tomorrow may be a snow day too!

                Comment

                • jfines69
                  Member
                  • Jun 2010
                  • 28848

                  #23
                  Originally posted by VAB2013
                  Thank you Jim for all of your help! BIG SNOW update! Right now it is snowing like crazy all around us to the West, North and South but hasn't made it here yet, just flurries** From the looks of things, tomorrow may be a snow day too!
                  Any time Vivien... We may even get a snow day here tomorrow... Chances are increasing for the freezing rain and no one down here has the equipment to treat the roads!!!
                  Jim
                  (A.K.A. Elmer Fudd) Be verwy verwy quiet... I'm hunting coins!!! Good Hunting!!!

                  Comment

                  • VAB2013
                    Forum Ambassador
                    • Nov 2013
                    • 12351

                    #24
                    Originally posted by jfines69
                    Any time Vivien... We may even get a snow day here tomorrow... Chances are increasing for the freezing rain and no one down here has the equipment to treat the roads!!!
                    So you were not kidding! Wow Jim, that is bizarre! You would think they'd know what to do, you should have plenty of salt down there! Beeeee careful, ice is the worst!

                    Comment

                    • jfines69
                      Member
                      • Jun 2010
                      • 28848

                      #25
                      Originally posted by VAB2013
                      So you were not kidding! Wow Jim, that is bizarre! You would think they'd know what to do, you should have plenty of salt down there! Beeeee careful, ice is the worst!
                      I'm not allowed to drive so I am good We have a nice sheet of ice on the van this morning... Roads are not to bad except in spots from all the reports and of course the bridges are icey... I took a pic of the van this morning... Once I download it I may post it in off topic!!!
                      Jim
                      (A.K.A. Elmer Fudd) Be verwy verwy quiet... I'm hunting coins!!! Good Hunting!!!

                      Comment

                      • Petespockets55
                        Paid Member

                        • Dec 2014
                        • 6890

                        #26
                        Originally posted by jfines69
                        I'm not allowed to drive so I am good We have a nice sheet of ice on the van this morning... Roads are not to bad except in spots from all the reports and of course the bridges are icey... I took a pic of the van this morning... Once I download it I may post it in off topic!!!

                        That would be neat.
                        ( I know it is old hat for all you folks up "nahth" and you want the misery to end but we don't see this happening down here very often)

                        Comment

                        • VAB2013
                          Forum Ambassador
                          • Nov 2013
                          • 12351

                          #27
                          Originally posted by jfines69
                          I'm not allowed to drive so I am good We have a nice sheet of ice on the van this morning... Roads are not to bad except in spots from all the reports and of course the bridges are icey... I took a pic of the van this morning... Once I download it I may post it in off topic!!!
                          So you did get some ice in Sunny Florida! That is pretty crazy! I'll never forget the time I got stuck at work in downtown Nashville and even though we closed the office the snow was falling in sheets already. The interstate was like a slip n slide, saw one car going a little fast do a 180 and the exit ramp that I needed to get off at had a couple of cars that slid off into the ditch. I made it home but my nerves were shot! I'll be looking for your van pic

                          Comment

                          • jfines69
                            Member
                            • Jun 2010
                            • 28848

                            #28
                            I use to love the snow and ice it was always easier to do donuts on ice/snow than on concrete or asphalt
                            Jim
                            (A.K.A. Elmer Fudd) Be verwy verwy quiet... I'm hunting coins!!! Good Hunting!!!

                            Comment

                            • VAB2013
                              Forum Ambassador
                              • Nov 2013
                              • 12351

                              #29
                              Originally posted by jfines69
                              I use to love the snow and ice it was always easier to do donuts on ice/snow than on concrete or asphalt
                              uh huh... unfortunately that tell me just a tad about your past Jim LOL! My daughter said the same thing yesterday... enough snow to do a donut and I'm like.... plleeeasseeee don't!

                              Comment

                              • jfines69
                                Member
                                • Jun 2010
                                • 28848

                                #30
                                Originally posted by VAB2013
                                uh huh... unfortunately that tell me just a tad about your past Jim LOL! My daughter said the same thing yesterday... enough snow to do a donut and I'm like.... plleeeasseeee don't!
                                Taught my kids how to drive on ice and snow... Dunkin donuts has nothing on me we made lots of donuts in the parking lots
                                Jim
                                (A.K.A. Elmer Fudd) Be verwy verwy quiet... I'm hunting coins!!! Good Hunting!!!

                                Comment

                                Working...